Toilet plumbing is very common, which is the most commonly used part of a building? Of course, it’s the bathroom. Knowing how to fix things is the most valuable skill that a person can learn. Be it cooking, washing or plumbing, they come in handy all the time. This article will help you master the much needed skill of the hour. Now, take a moment to think. you can research plumbing near me for more information.

Nobody wants to visit a dirty bathroom or use faulty commode toilets. Hence, knowing how to fix them will save you from spending money on plumbing services. Even if you don’t know anything about toilet plumbing, you will have understood enough to fix minor issues by the end of this article. If you are planning to install a toilet, you can take the help of this information.

Toilet plumbing – Discussion the following parts-

•  The  different parts of a commode toilet
• The equipment required to set it up
• A step by step process to set up your toilet and connect it to your drainage system.

If you manage to stick with us till the end, you will go back with a lot of information on the do’s, don’ts and how top’s of toilet plumbing. Please note that we shall be explaining only the crane plumbing toilet. Let’s get started. you can also check plumbing fixtures.

Toilet Plumbing Parts – Short Description

The basic structure of a toilet contains a cistern which has the flush on it and a bowl, where you basically dump your waste. The bowl has several water jets that push out water at high pressure when you press the flush to get rid of the waste. The cistern has a reservoir of water which gets filled as soon as the tank is emptied by a flush. We have also elaborated on the plumbing companies.

The amount of water that enters the tank is determined by a ballock. Let’s see how it works. When you press the flush, the water from the tank drains into the bowl. This drop in pressure is sensed by a ball that floats in the cistern. If you lift the top of the cistern, you can easily see the rubber ball.

This rubber ball signals the ballock that the tank is getting empty after which, the ballock refills the tank.

What happens after you push the flush lever?  The water then moves from the tank to the bowl via a narrow passage called the flush valve. Initially, the passage stays closed with the help of an air tight valve. Pressing down the flush lifts up the flush valve to let water flow. 

Now that we are done with the different type of toilet plumbing parts, let’s talk about how you can install it in your house. to know more details about plumbing and heating just visit.

Terminology

If you are just starting out on plumbing, you might not be familiar with the plumbing lingo. Hence, we want to clearly define a few terms that you need to know in order to know how to run plumbing for a toilet.

Flange: A flat ring like structure that serves to attach and strengthen two different structures. In toilet plumbing, these two structures are the base of your commode and the connecting pipeline below your floor.

Wye: A hollow curved pipe  that basically connects two longer pipelines. It is bent at acute or right angles.

Sanitary tee: A sturdy structure used to fit your toilet pipeline with the main drainage of your house. It is either horizontal, which gives it a ‘T’ shape or is slightly bent in shape.

Soil stack pipe: The pipe that drains the sewage from your house.

Closet elbow- A short and wide pipe bent at a ninety dehree angle.

If you have understood the terms well, you can proceed towards the next section.

Toilet Plumbing Installation – Toilet plumbing steps

In order to avoid confusion, we will start by detailing out the methods to set your toilet base and then move on to the steps involved in connecting the toilet pipeline to your main drainage. you get here all the details about toilet plumbing.

Step 1- Locate the position where you want to install your toilet. Make sure that it is at least three inches away from your bathroom wall. Also, make sure that there is a space of fifteen inches on either side of your toilet. This means that there there should be nothing within thirty inches of your toilet.

Step 2- After you have located the area, cut out a circle with a diameter of 3-4 inches on your floor. This hole is made to install three pipes of 1 inch each. These pipelines will help to carry away the waste water.

Step 3- Fix a closed flange in the place of the hole. In case you don’t know what a flange is, refer to the ‘Terminology’ section. Place the flange in position with screws and cement so that it does not dislocate from its position.

Step 4-  Below the flange, attach a bent pipe that can be used to connect the flange to the toilet pipeline. This bent pipe is called a closet elbow.

Step 5-  Measure the distance between the closet elbow and your main soil stack pipe using a flat measuring tape. Refer above for the definition of stack pipe. This measurement is taken to provide a downward slope between the stack pipe and the closet elbow so that the water can easily flow out without any obstruction.

Step 6-   Make sure there is a slope of quarter inch for every feet of distance between the stack and the closet elbow. Draw a mark on the stack pipe such that there is a slope between it and bent pipe. Cut the stack at this mark with a saw and put in a sanitary tee in the gap. 

The sanitaty tee should be placed such that its hollow end faces the closet elbow. Now, glue the two pipes with a strong adhesive or cement. Make sure the connection is not wobbly. Otherwise, the waste water might start leaking through the pipes and it will surely wreck havoc.

Step 7-  Until now, we have taught how to fix your toilet to the floor while connecting it with your pipelines. Now, let’s see what needs to be done with the wall behind the commode toilet. You need to connect your toilet to a vent pipeline that will keep your washroom free of any stinking smell.

For this, you will need to build a vertical and long vent pipe. Take a wye of measurement according to the size of your house pipeline framework and attach it to your bathroom wall. This vent pipe can either join the main vent pipe of your house or open independently. You can choose how you want the pipe to be.

It is best to use a vent that is wide. It will help to channel the air better and faster while preventing foul smell from accumulating in your washroom. According to the plumbing guidelines, you should use a vent pipe of 4″ * 3″ measurement.

Step 8- The final step of toilet plumbing installation is not mandatory, but it is necessary to ensure good health and hygiene. We advise you to install a trap seal while setting up the closet elbow and stack pipe.

What purpose does a trap seal serve? Well, it prevents pathogens from entering clean water in your pipelines. The sewer in toilet pipelines contains potentially dangerous bacteria and parasites that can give you gastric trouble, dysentery and a plethora of serious health complications. In order to avoid such potentially dangerous health issues, always go for a trap seal, preferably the S-bent one. 

Trap seals are pretty inexpensive as compared to the other plumbing tools and work really well in providing a barrier between you and the germs. Including trap seal is a smart move and if you are a smart consumer, you will surely install it.

You have now become acquainted with how to do plumbing for a toilet.  Honestly, the process isn’t easy but once you grasp the steps, you can easily fix your own toilet.

We also provide tutorials for installing toilet bidets, faucets and teach several toilet plumbing skills. If you are interested in learning more and becoming a pro in such tasks, keep an eye on our latest updates.

Toilet Parts Names – Recommended material for plumbing

The primary parts when you going to for a toilet plumbing –

• Flange
• Closet elbow
• Sanitary tee
• Soil stack pipe
• Wye
• Trap seal

Obviously you will also need your commode but that is what you are plumbing for. Above we discussion about the list of toilet parts names, if you need more details than you can find also plumbing contractors.

What we want to inform is that it is very important to choose the right kind of material for your plumbing. Hence, we would never ask you to compromise on the quality of the products.

For flanges, we would recommend you to buy the ones made of stainless steel and the wye, sanitary tee and closet elbow should be of sturdy PVC material. Your main toilet pipeline too can be strong plastic but we would recommend something else.  We would like you to buy the copper pipelines that are available in the market.

Copper pipelines will last longer and have a higher resistance to increasing water pressure. Leaking toilet pipeline is the last thing you would wish for. So, if you wish to avoid such unpleasant circumstances, take the necessary precautions beforehand. It will save you a lot of time, energy and money.

Plumbing A Toilet – Problems of self plumbing

We appreciate the fact that you want to do your toilet plumbing by yourself. And if you are an aspiring plumber, you are most welcome to learn from our website. But we want to address a small problem that might arise from self learning.

You might have every theoretical knowledge but applying it in real life is always different. Toilet plumbing requires a lot of practice and patience but cannot be mastered within a day. Professional plumbers have had years of training and education regarding the plumbing services. Hence, they are much more experienced in this field than you are.

If you don’t have any prior knowledge of toilet plumbing, please call in an expert plumber to solve your issues. You can then ask him about the various techniques of Plumbing A Toilet and see what steps and methods he uses. This will give you an idea of what plumbing would look like if you did it.

Another trick of improving at this task is to keep practicing plumbing with the required equipment’s. You can practice how you are going to take the stack pipe measurement, improve your sawing skills and learn more about pipelines. These small habits really help you master the plumbing skills.

Conclusion

 We hope that you have learnt a lot about toilet plumbing.  Take a note that there is no ‘correct’ way of plumbing. Sure, there are a few basic guidelines which you need to follow but beyond that, it’s all about your calculations and precision.

We have detailed out the simplest and surest way to get your job perfectly done. Once you start knowing more about the whole plumbing thing, you will discover a lot more and might even come up with your own techniques of fixing issues. Whatever be the case, we want you to improve with every task and help you be the best version of yourself.

Once you have learnt how to install, fix and repair your toilet, you can even teach others so that they can become self sufficient as well. Toilet plumbing is essential for every household. Having knowledge of this will help you increase your savings.

So, are you ready to learn the new skill? you can also visit our homepage for more information.